• Lubricants for Drawing of Mild Steel Wire

LUBRACAL	CALCIUM BASED POWDER FOR MECHANICALLY DESCALLED WIRE-ROD BREAKDOWN SUITABLE FOR CONTINOUS DRAWING UP TO 3 METERS PER SECOND. LEAVES A DARK FINISH ON THE WIRE
NBS-121NA	SODIUM BASED POWDER FOR MECHANICALLY/CHEMICALLY DESCALED, THICK SIZE WIRE, SINGLE PASS, SLOW DRAWING
EZ-6	SODIUM BASED POWDER FOR PHOSPHATED, THICK SIZE WIRE, SINGLE PASS, SLOW DRAWING
EZ-428	HIGH TITRE SODIUM BASED POWER FOR  WIRE ROD BREAKDOWN, SUITABLE FOR MECHANICALLY/CHEMICALLY DESCALED AND PHOSPHATED WIRE, SINGLE PASS, MEDIUM SPEED DRAWING
EZ-25	CALCIUM BASED POWDER FOR MECHANICALLY/CHEMICALLY DESCALED WIRE ROD BREAKDOWN AND INTERMEDIATE DRAWING FOR CONTINOUS DRAWING UP TO  5 METERS PER SECOND
EZ-12	CALCIUM BASED UNIVERSAL LUBRICANT, HIGH TITRE, CONTAINS E.P.ADDITIVES, VISCOSITY MODIFIERS AND LUBRICITY ENHANCERS, SUITABLE FOR SINGLE PASS/MULTIPLE PASS, CHEMICALLY DESCALED/MECHANICALLY DESCALED, FOR SLOW AND MEDIUM SPEED DRAWING
EZ-28X	CALCIUM BASED LUBRICANT, HIGH TITRE, CONTAINS E.P.ADDITIVES, VISCOSITY MODIFIERS AND LUBRICITY ENHANCERS, SUITABLE FOR MULTIPLE DRAFT, MECHANICALLY DESCALED WIRE, UP TO SPEEDS OF 15 METERS PER SECOND
EZ-19	CALCIUM BASED LUBRICANT, RICH, HIGH TITRE, CONTAINS E.P.ADDITIVES, VISCOSITY MODIFIERS AND LUBRICITY ENHANCERS, SUITABLE FOR MULTIPLE DRAFT, CHEMICALLY DESCALED WIRE, UP TO SPEEDS OF 15 METERS PER SECOND
EZ-540	SODIUM BASED LUBRICANT, RICH, HIGH TITRE, CONTAINS E.P.ADDITIVES, VISCOSITY MODIFIERS AND LUBRICITY ENHANCERS, SUITABLE FOR MULTIPLE DRAFT, MECHANICALLY DESCALED WIRE, UP TO SPEEDS OF 15 METERS PER SECOND. FOR A PLATING QUALITY SURFACE FINISH
LUBRACAL-FINE	LOW COST, MIXED STEARATE FOR USE IN CONTINOUS DRAWING OF FINE SIZES OF LESS THAN 2MM AFTER ANNEALING.SUITABLE FOR BINDING WIRE
LUBRACAL-840	CALCIUM BASED, RICH POWER, FOR USE IN CONTINOUS DRAWING OF FINE SIZES OF LESS THAN 2MM AFTER ANNEALING.SUITABLE FOR BINDING WIRE
LUBRA-G	SOLUBLE WET WIRE DRAWING GEL, FOR USE IN HIGH SPEED, WET WIRE DRAWING FOR VERY FINE SIZES OF M.S., HIGH CARBON AND G.I. WIRES

• Lubricants for Drawing of High Carbon Wire

EZ-41T	EZ 41T is a calcium stearate based lubricant that contains extreme pressure (E.P.) additives, organic viscosity improvers and other lubricity agents. This combination of ingredients provides exceptional lubricating properties and leaves a homogeneous residual on the drawn wire. SUITABLE FOR MECHNAICALLY/CHEMICALLY DESCALED,WIRE ROD BREAK DOWN OF HIGH CARBON AND STAINESS STEEL WIRE. SUITABLE FOR DRAWING AT HIGH SPEED.
EZ-595	A rich sodium high melting point soap powder recommended for use on more severe drafting applications or where less than effective die and block cooling exists. Used for high speed drawing applications on both high carbon and stainless steel, or sometimes used with one of the calcium based ripper box lubricants.
LUBRA-G	SOLUBLE WET WIRE DRAWING GEL, FOR USE IN HIGH SPEED, WET WIRE DRAWING FOR VERY FINE SIZES OF M.S., HIGH CARBON AND G.I. WIRES

 

• Lubricants for Drawing of Non-Ferrous Wire

EZDraw CP10	A concentrated copper rod and wire drawing lubricant containing specialty lubricity additives, emulsifiers, corrosion inhibitors, and biocide. It is designed to offer optimum performance in most drawing applications and is expressly formulated to minimize build up and foam in drawing machines.
EZDraw CP40	A highly concentrated semi-synthetic copper rod and wire drawing lubricant containing new specialty lubricity additives, emulsifiers, corrosion inhibitors, and biocide. It is designed to offer optimum performance in most drawing applications, most types of water and is specifically formulated to keep your system clean, be very pH stable and running for an extended amount of time.
EZDraw CP90	A highly concentrated synthetic copper rod and wire drawing lubricant containing newly developed lubricity additives, emulsifiers, corrosion inhibitors, and biocide. It is designed to offer optimum performance in most drawing applications, most types of water and be very pH stable. It is also specifically formulated to keep your system running clean and extend your bath life, while leaving the wire surface very clean for processing.
EZDraw CQ1	A soluble oil recommended for use as a quench water additive for the continuous annealing of nonferrous wire. It is a blend of emulsifiers, water conditioners, corrosion inhibitors, and lubricating ingredients. This product prevents water spotting and preserves a bright, clean finish on nonferrous wire coating them with a very light protective film.
EZDraw EMULS9	A concentrated blend of emulsifiers and pH buffers that when added to a lubricant system will improve detergency and stability properties of the solution. Using it will help extend lubricant solution life and enhance system cleanliness, metal wetting and fines filtration.
EZDraw PHU	A mild alkaline neutralizer and pH buffering compound for lubricant emulsion systems.